CarPro Gliss is a Hyper Slick Top Coating or standalone product that is incredibly easy to use and gives a smooth, glossy & extremely hydrophobic finish to any paint surface.

This coating utilises new advances in nanotechnology and has designed an all-new hyper-smooth, hyper-glossy and easy to apply ceramic nano coating that excels as a top-coat for all CarPro CQuartz coatings.

CarPro Gliss also increases resistance to static build-up, dust retention and many types of mineral and water stains! Combining modified long-chain carbon fluorine polymers and enhanced nano-technology, CarPro Gliss is an evolution in top-coat protection and its immensely tactile feel, achievable on any non-porous surface. This next generation coating even though works well as a top coating over existing coatings, when used on its own offers in excess of 12 months protection.

This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!

Kit Includes:

1 x 50ml bottle of CQuartz Gliss (20ml /- per coat)

1 x Applicator Block

4 x 4″ Microfibre Suede Applicators

Features:

–         Super slick and smooth

–         Next Generation Top Coat!

–         Also works great as a stand-alone Nano-coat!

–         Anti-static: Non-oily / resists dust retention

–         Adds thickness to your existing coat when used as a top coat

–         Enhances resistance to water spots and mineral stains

–         Extreme Hydrophobic effect

–         Enhances Gloss and life of any ceramic coating

Specifications:

–         Durability: 12 Months

–         Coverage: 20ml per coat /-

–         Water contact angle: 115

–         Recommended working temperatures: 5c – 30c

Directions: (For use as primary coat)

–         Wash with Reset, decontaminate, and polish with a CarPro abrasive polish

–         Wipe down with CarPro Eraser (vehicle must be 100% dry and free of moisture or dew.)

–         Drag two lines of product across length of suede wrapped applicator.

–         Apply evenly across surface, approximately 2 ft x 2 ft section at a time.

–         Add more product to applicator as needed to keep a wet, even application.

–         CarPro Gliss will flash fast and when a white haze forms, immediately wipe off all residues using a microfiber towel. If haze is left on too long then reapply and immediately wipe off.

–         If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.

–         Total cure time: 12 hours.

Directions: (For use as top coat)

May be applied 4 hours or longer after CQuartz.

If IR cured may be applied after 45 minutes from CQuartz application